Editorial Product Review:Amazon.com Item Description:The Wiremold White Cordmate II kit contains everything you need to hold wires and cords within a space-saving cord channel that's flexible and hinged, and easily snaps opens and shut. The peel and stick self-adhesive backing is easily attached onto baseboards or walls, and the white PVC components can be painted or stained to match a room's color. This kit is ideal for holding networking cables and audio/video wiring.
What's in the Box l2 feet of cord channel (3 four-foot sections), two flat elbows, inside elbow, outside elbow, two couplings, and T-fitting.
Product Availability: Usually ships in 24 hours
More related to this product:
click for more
More related to this product:
Buyer Reviews
Average Buyer Rating:
-
For those not wanting to tear up drywall immediately
I am a wire nazi and like all my A/V cables run neat. However, after my new LCD was mounted I had a power cable and HDMI cable ruining the look. I did not want to rip through drywall, route around fireplace vents, drill through 6 studs, and refinish drywall to make it look nice. Maybe one day I will, but not yet. I posted images of the before and after condition.
Wiremold Cordmate II was an ideal solution:
1) Inexpensive
2) Easy to install
3) Very pratical and funtional
4) Looks good
5) Individual pieces available (elbows, corners, etc.)
Install took maybe 1 hour total to plan, measure, cut, and paint (20 minutes of actual work; 40 for paint drying). I painted before install and found that applying paint with a small brush and then using a small, dry roller gave a very finished look. Also make sure your cables are plenty long enough (with some alpha factor) before installing. Do not plan on running a ton of cables through this version - power, HDMI, and maybe a coaxial would be it.
I was very skeptical about the cordmate's ability to hold in corner with thick cables. I had an inside and outside 90 degree elbow within 3 inches which is a lot of force to hold. But the double sided tape is very strong and holding very good.
Perhaps the only minor downside would be ability to add or change cables. It does open, but it takes some pressure. So make sure to feed all wires needed first before taping to wall.
Overall, this wire nazi is very impressed and would highly recommend.
Customer Rating: 
-
Great Product!
This product is great; I used it for the cables to and from my wall-mounted HDTV, and it looks very clean and professional without having to go through the wall. I was able to squeeze 4 AV cables into it, although it will really hold about 3. I was even able to cut it with some heavy-duty scissors. The only downside is that the number of corner pieces is a bit limited, so you have to be strategic about how you lay it all out.
Customer Rating: -
Does the Job
Got this item to conceal the wires that would hang between my wall mounted 42 inch plasma TV and the entertainment stand below it which holds my cable box and DVD player. There were three wires to conceal in all - cable box wire (regular coaxial cable thickness); HDMI wire from DVD player to TV (slightly thinner than coaxial cable); and cable for TV plug to wall (very thick for some reason). The cableholder just barely held these three cables (but it did hold them. remember you dont have to get the head of the cable through the cordmate - it can open up so you can clip it over the hanging cables (very convenient). The cordmate is also very paintable to match your walls. paint before you stick it on wall and use a roller not a brush. I used a brush at first and it was harder to paint and was leaving brush lines (could have been brush I was using but...). Anyway, good product and inexpensive - I would buy again for such uses. easier to cut as well than I thought it would be.
