Editorial Product Review:

Amazon.com Item Description:
The Wayne 1-1/2-Inch-by-24-foot sump discharge hose kit with clamps can be used with all sump pumps that have a 1-1/2-inch discharge tapping. It's sectioned at every eight feet for easy cutting to the desired length, with a threaded male adapter and hose clamp for mounting to the pump.









Product Availability: Usually ships in 24 hours

---

More related to this product:
     click for more

More related to this product:

• Wayne 3/4 HP Stainless Submersible Sump Pump #CDU980
• Wayne RECONDITIONED 1/3 HP 2,800 GPH Pedestal Sump Pump #57032-RP1
• Wayne 1/6 HP 2,000 GPH Oilless Submersible Utility Water Pump #RUP160
• Wayne 1/3 HP Cast Iron Submersible Sump Pump #CDU790
• Wayne 1/2 HP Cast Iron Submersible Sump Pump #CDU800
• click for more

---

Customer Rating: - Shame on you Amazon!
i purchased a water pump on amazon, and when i did amazon offered this hose to go with it. (with the option "buy them both"). unfortunately this was NOT the correct size for the water pump we ordered. so, i'm not sure about the quality of this particular hose, since it is not designed for the water pump i purchased, and i was unable to use it.

---

Customer Rating: - Does the job
I'm not sure why this is being reviewed so poorly. I found it to be exactly what it appears to be, a 1 1/2" flexible plastic hose kit that includes everything one needs to connect to a sump pump with a 1 1/2" outlet. I just installed one on an appropriate Taylor sump pump. It took ten minutes, required no trips to the hardware store, and works just fine. I will eventually replace it with more permanent PVC piping, but this hose was perfect to get me up and pumping ASAP.

Yes, the hose is relatively lightweight plastic, but it is plenty heavy for use with sump pump pressures. I never felt I was anywhere close to breaking it. I also think heavier plastic would compromise flexibility, making the hose harder to maneuver. My only suggestion to Taylor would be to also include a 1 1/4" fitting so this hose could be used with their smaller pumps too.

---

Customer Rating: - connecting to pump a pain
bought this to go with a wayne pump. connecting it to pump involved two trips to the local hardware store, wasting my time!! once connected worked fine.

---

Customer Rating: - Not compatible with the VIP50
Please be aware that this is a 1 and 1/2" hose and the VIP50 has a 1 and 1/4" outlet, so it will not fit (even though Amazon offers it under their "buy both" program).