Editorial Product Review: :The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. The Supply and Return ports can accept 3/8', 1/2', 5/8' or 3/4' Zurn pex tubing by attaching the appropriate tubing to manifold connectors (Sold Separately). (QHMMC2= pair, 3/8'manifold connectors),(QHMMC3= pair, 1/2'manifold connectors),(QHMMCJ= pair, 5/8'manifold connectors),(QHMMC4= pair, 3/4'manifold connectors). The GPM flow rate can be adjusted at ...
Editorial Product Review: :Zurn has changed the look of this Manifold. The new style has the thermometer in the ball valve and the vent assembly at the end. They both have the same features. You will receive one of the styles pictured above. The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. To divide the loops into zones ...
Editorial Product Review: :The Universal 100RA infrared radiant heater gives you the efficiency of radiant heat--which warms objects directly instead of the surrounding air--with the multidirectional coverage of a forced-air model. Unlike most radiant heaters, the 100RA gives you 360 degrees of heating, allowing you to use it to heat spaces as large as 2,350 square feet. This unit is recommended for use with a 100-pound cylinder (it will not work with the 20-pound 'barbeque' cylinders).--Josh DettweilerWhat's in the BoxHeater, hose, regulatorFive Tips for Buying a HeaterChoosing a space heater is a matter ...
Editorial Product Review: :Used to connect Zurn 3/8' Pex Tubing to Zurns QickZone Manifold or Zurns Preassembled Manifold (#QHPM). To connect the tubing to the manifold you first make sure that the tubing is cut to length with a straight cut free of burrs. Slide the nut over the tubing with the threads facing the manifold, then slide the split ring over the tubing. Insert the barbed fitting into the tubing. Insert the O-Ring end of the barbed fitting into the Manifolds port, slide the nut and split ring up the tubing and thread ...
Usually we're fans of Logitech's gaming mice, but its highest-end G9 Laser Mouse is expensive, overly complex, and lacks the ergonomic thought we've come to expect. If you like to brag about dot-per-inch limits, perhaps the G9's 3,200dpi laser will be enough to sell you, but for the price, we expect the design to match.
