Editorial Product Review:

Item Description:
mfr: Finley Products, Inc. 2x4basics - Make It AnySize - ShelfLinks - 6-pack - Sand

• YOU DETERMINE THE SIZE AND CONFIGURATIONa Just add 2x4's to 2x4basics ShelfLinks to make functional and custom shelving in any length, height and configuration.

• IT IS EASY! Simple assembly with only a powered screwdriver and a saw. Only straight, 90 degrees cuts are required vno miters or angles. All hardware is included.

• FIT ANYWHERE - HOLD ANYTHING. Using a building block mentality, use as many ShelfLinks as you need to create shelving in dimensions not possible with other brands of shelving. ShelfLinks shelves can be modified or expanded as your storage requirements change. When used in conjunction with the 2x4basics Workbench Legs, ShelfLinks can effectively satisfy your storage requirements in the garage, basement, workshop, attic, pantry, shed, dorm roomawherever!

• SHELFLINKS ARE STRONG! No more flimsy shelves. Made of heavy gauge structural resin and assembled with rugged 2x4's, ShelfLinks can support spans up to 8 feet (2.4m) and up to 1000 pounds (400kg) per shelf.

• LIFETIME WARRANTY. ShelfLinks are built to last.

• Item Dimensions in inches: 16 L x 23 W x 3.5 H.
FURNITURE Finley Products, Inc.>

Amazon.com Item Description:
Turn two-by-fours into any shelving you need using only a saw and screwdriver. Here's how it works: Each ShelfLink has two apertures into which you insert your custom-cut 2-by-4s to make the legs. Then you attach four 2-by-4s to the top (using the included screws) to make the storage surface. You can create multiple shelving levels by mounting the top 2-by-4s on the very edge instead of all the way across, which allows the legs to continue upward through the link. ShelfLinks are easy to put together and can be modified or added to as storage or work areas change. ShelfLinks will support spans of up to 8 feet, and each shelf can hold up to 1,000 pounds. Note that the 2-by-4s are not included, so you will have to cut them to the desired length yourself. --Josh Dettweiler

What's in the Box
Six ShelfLinks, 78 screws





Accessories available:
     click for more

Accessories available:

• Zircon 60560 LaserBall 360
• Black and Decker BDSL30 24-Inch 3-in-1 Gecko Grip Level
• Black & Decker BDSL10 36-Inch Gecko Grip Level with Accu Mark
• Stanley 62-502 11-Piece FatMax Screwdriver Set
• Stanley 33-425 Powerlock 25-Foot by 1-Inch Measuring Tape

Product Availability: Usually ships in 24 hours

---

More related to this product:
     click for more

More related to this product:

• Finley Products Inc. 14429 2x4 Basics Workbench Assembly Kit
• Finley 2x4basics Shelf Links, Black, 6-Pack #07419
• Finley Products Inc. 11419 2 x 4 Basics Firewood Rack
• 2x4basics AnySize Table or Bench, Sand, 10310
• Black & Decker FSMVC 9.6-Volt to 18-Volt Slide Style Battery Charger
• click for more

---

Customer Rating: - Finley Wood Rack Brackets
Reasonable design. Rot/Decay Resistant. Don't know how it will hold up under UV-sun exposure. Moderately pricy unless purchased in a bulk pack. Versatile for custom design assemblies. Accepts standard grade 2 x 4s. Requires fasteners through pre-drilled holes for safe, sturdy assembly. A little tricky to install continuous shelving board. If handy make the cut-outs for the vertical posts, and a few screws secured to horizontal rails. Very sturdy! Otherwise, follow mfg. instructions and cut half sheets for shelving. That leaves voids on the ends and middle, and looks cosmetically crude. But you can cut inserts and patch them in, like I did. Useful as base supports to align/square 2x4 uprights and rails for multi-shelf storage. I used 3 of them to create the base for a 84" high x 104" long x 16" deep storage unit. Brackets on each end and one at the mid-span. Built the rest with only 2 x 4s and saved a ton of money, since brackets at each of 5 shelves = 15 brackets.

---

Customer Rating: - Work beautifully, but somewhat pricey for little hunks of plastic
I built a firewood rack (separate logs and kindling) with this kit and pressure treated 2x4s. Works very well and takes no time to assemble. My only complaint is that, fundamentally, these are super-inexpensive parts to have made in a factory in China and the sale price reflects a lot of profit. Oh well, they do work...

---

Customer Rating: - GREAT PRODUCT FOR THE SIMPLE GUY
NOT FANCY OR SHINEY..BUT IS WHAT IT IS..GREAT FOR A NICE SIMPLE LOOK IN THE WORK ROOM OR FAMILY ROOM..GET SOME 2 BY4 AND A WAY YOU GO..

---

Customer Rating: - Easy to put together, and strong.
I've built 3 units with the shelf links, and I've been extremely pleased with the results. Comes with the screws, and easy to follow directions, including how to measure the "in-between" 2x4's for a snug fit. Hardest part of the whole process is picking out the best 2x4's at Home Depot or Lowes...