Editorial Product Review:

Item Description:
A handy little project stapler, this 1/4-inch crown stapler has as many features as larger, more expensive units. Several features protect the project from accidental damage. First, a built-in depth-of-drive adjustment allows precise countersinking of staples to match the application. Also, the safety contact is behind the nose, allowing better visibility in low clearance situations so staples are accurately placed. A removable rubber tip prevents damage to delicate materials. Finally, a restrictive-fire trigger allows only one staple to fire, eliminating double' firing. The adjustable exhaust port also protects the operator by allowing the exhausted air to be deflected away when a close look at the work is required. With a fastener range of 1/2- to 1-inch, this stapler is great for a variety of tasks including assembling drawer boxes, fastening cabinet backs and paneling. In the event of a jammed staple, the quick-release nosepiece allows easy clearing and reduced down time.'



Accessories available:
     click for more

Accessories available:

• B & C Eagle 9018 3/4-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box)
• B & C Eagle 9022A 7/8-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box)
• B & C Eagle 9025A 1-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box)
• PUR-Hose PUR-14X050 1/4-Inch x 50 Polyurethane 250 PSI Air Hose
• PUR-Hose PUR-14X100 1/4-Inch x 100 Polyurethane 250PSI Air Hose

---

More related to this product:
     click for more

More related to this product:

• B & C Eagle 9018 3/4-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box)
• B & C Eagle 9012A 1/2-Inch by 18 Gauge by 1/4-Inch Narrow Crown Galvanized Finish Staple (5,000 per Box)
• Factory-Reconditioned Porter-Cable BN125AR 5/8-inch to 1-1/4-inch 18 Gauge Brad Nailer
• Porter-Cable PIN100 1/2-Inch to 1-Inch 23-Gauge Pin Nailer
• Porter-Cable 690LR 11 Amp 1-3/4 Fixed Base Horsepower Router
• click for more

---

Customer Rating: - Nice tool, good price, like new
The only way I can tell it's not new is the "R" stamped on the serial number plate and a green sticker on it. The trigger pull is light but just right, not a hair trigger but quick and easy. An adjustable air exhaust director on the top lets you point the unpleasant (if you had to aim it at your face) blast of air away from you no matter which way you need to point the tool. Some other brands I've used don't have this feature. It's light but seems sturdy and well built, it's a pleasure to use. [I only wish my air compressor weren't so darn noisey.] I glue together lots of boxes to make speaker prototypes and this sure beats using clamps by a longshot.

*edit* The one I had was stolen so I ordered a replacement, this one was scratched up and the trigger felt loose and wobbly, it didn't have the "R" on the sticker like the last one, clearly it was just repaired and not reconditioned to "like new" condition. So I'm lowering my rating to three stars from five.