Editorial Product Review:

Item Description:
DW7881 WORK LIGHT

Amazon.com Item Description:
This scroll saw work light from DeWalt is designed as an accessory for the DW788 scroll saw. It has a flexible neck for easy positioning, and it includes a 25-watt bulb. The 3-wire grounded plug is made for safety.



Accessories available:
    click for more

Accessories available:

• DeWALT Men's Stabilizer Lightweight Oxford
• Empire Manufacturing TOOL-6D The Complete ToolSaver System
• Fine Woodworking
• Woodworking Basics: Mastering the Essentials of Craftsmanship

Product Availability: Usually ships in 24 hours

---

More related to this product:
     click for more

More related to this product:

• DEWALT DW7880 Scroll Saw Stand
• DEWALT DW788 1.3 Amp 20-Inch Variable Speed Scroll Saw
• Delta 40-620 3 Dozen Assorted Scroll Saw Blades
• Scroll Saw Workbook: Learn to Use Your Scroll Saw in 25 Skill-Building Chapters
• HTC HRS-2158 3 Leg Scroll Saw Stand Mobile Base
• click for more

---

Customer Rating: - Wrong replacement bulb specified
My light has worked out fine. But my work light says to use a candelabra base bulb as a replacement. The correct bulb is a 25 watt R-14 flood with an INTERMEDIATE base. Once I knew that the replacement bulb was easy to find.

---

Customer Rating: - For the guy who has to have all manufacturer's options???
Ok, it matches the rest of the saw and it comes from DeWalt. It is just a light and frankly any light would work on a stand next to the saw. The earlier comments are correct that it drops too close to the table and won't stay upright. The gooseneck on it is very tightly sprung and wants to keep straightening out on you so the way it is designed makes it drop toward the table. It came with my saw as part of package but personnally I don't use it much since it casts a shadow on the work that is very distracting. My shop is well lit so don't need it and if I did would probably go with florescent to eliminate the shadow problem.

---

Customer Rating: - Nice extra for the dewalt scollsaw
This light is a nice extra option and bolts right on the holes already on the saw. Only takes a minute or two to add on, and really puts light where you need it.

---

Customer Rating: - DW7881 Scrollsaw light
I've used the light for several project so far & it does give off adequate light. But, the on-off switch is kinda rickey dink. If you don't turn it just right, it doesn't work. It attached to the DWS788 scrollsaw very easily using two of the screws already mounted on the saw. There is no question that the light is adequate but they should change the on-off switch.