Editorial Product Review:

Item Description:
4-1/2' Angle Grinder, 7A, AC/DC, 11,000 RPM, Slide Switch, 5/8'-11 Spindle, Quick Change Wheel Removal, Low Profile Jamb Pot Gear Case, Spindle Lock, 2 Position Side Handle, Slim Body Design, 1 Piece Brush Arm, Includes Side Handle, Depressed Center Wheel, Adjustable Guard, Wrench & Manual, 4.1 LBS, 90 Day Money Back Guarantee, 1 Year Free Service, 3 Year Limited Warranty.









Product Availability: Usually ships in 24 hours

---

More related to this product:
     click for more

More related to this product:

• DEWALT DW4522 4-1/2-Inch X 1/8-Inch X 5/8-Inch-11 General Purpose Metal Cutting Wheel
• DeWalt DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor
• DeWalt DW4945 4-1/2-Inch Rubber Backing Pad with Locking Nut
• DEWALT DW4514B5 Heavy Duty 5 Pack 4-1/2-Inch x 1/4-Inch x 7/8-Inch Metal Grinding Wheel
• DeWalt DW4535 4-1/2-by-7/8-Inch 36-Grit Fiber Disc, 5-Pack
• click for more

---

Customer Rating: - Sturdy and dependable
I bought this grinder for use on my job, I'm the Maintenace Supervisor at a multi-use building, and have used it for a wide variety of jobs - everything from simply smoothing out a sticking metal framed door to cutting through rebar when we did some major remodeling.

This grinder is easy to handle, being small and lightweight enough to get into a tight spot yet still has the power for tough jobs. It has a simple on/off switch rather than a dead man switch but I feel that is a plus. I sometimes use this grinder for an extended period and like to shift my grip, I wouldn't be able to do that with a dead man switch. Please don't take this as a criticism of a dead man switch, I highly recommend that type if you are a casual user or inexperienced with power tool use - this grinder could cause serious injury if not used safely and properly.

It does vibrate, but that is common with any grinder, however the vibrations for this grinder seem to be minimized are not that tiring to my hands.

---

Customer Rating: - Dewalt D28110 4 1/2 in Small Angle Grinder
I have owned several (other makes) of grinders. All have functioned for awhile but failed under heavy duty. I needed to get a replacement so I selected the Dewalt D28110. I almost didn't buy it because it seemed too inexpensive compared to others & I was concerned it would fail me early. I am glad I did buy this Dewalt grinder as it has worked perfectly so far and seems to be destined to work for many years.

It is well constructed and I would agree with Dewalt's claim that it is "Heavy Duty".

It satisfies all my needs for a 4 1/2 inch grinder with ease.

Rob

---

Customer Rating: - Good grinder, but it ain't wrench free
This is a great budget grinder. I used it with a diamond wheel to cut out grout on about 40 sf of floor tile. Put it through the wringer at load with lots of dust for a few hours and had no trouble. I've cut several other large pieces of metal, pipes, etc. Works like a charm. Bearings are a bit noisy but it doesn't seem to cause a problem.

I do NOT think this is "wrench free" as DeWalt claims. It includes a wrench and the instructions do not explain how to remove the wheel without a wrench. I don't think it can be done. (Please post and tell me how if it can!) My other complaint is that the instructions are terrible, like all DeWalt instructions. It's so confusing to try to figure out what applies to this model and what does not, what is the right type of wheel, when a separate guard not included might be needed, etc.

---

Customer Rating: - Solid as always
I have had two of these units already and this grinder will last me over a year with no replacement brushes. I use it daily in my fabrication shop and any grinder that can go a year and withstand being dropped and kicked around frequently is a champ - especially at this price. An average user will be able to pass this unit on to a grandchild.